Doors, partitions, windows, balustrades - each of them unique, idividually designed, suiting tho the interior, executed from the safe and durable fused glass.

Fused glass is the modern way of forming the glass panels, that perfectly fits the modern interiors. Fused glass playes with  colour, translucency, texture. Glass panels may be flat or 3D shaped. The glass elements can serve as doors, partitions, windows, balustrades, plafonds, shower-booth elements... Fused glass panels may decorate, introduce additional light, divade space of the residential or public (eg. restaurant, office, hotel) interior. Additionaly scylpted, sandblasted or enamelled  may serve as the media of information (logo), or just constitute free artistic forms. The fused glass techniue is featured by its uniqueness - each panel, each object is an unique creation.

Art glass gallery

Glazing with the impressive, handmade decorative glass.

Glass panels cut to the size are mounted into the openings using no fittings. The most economic technique of decorative glass.
Maximum size of the separate glass pieces in the glazing is limited with the raw glass sheet size. The weight of 1 sq.m of the glazing depends of the thickness of the glass used. By the 3mm glass it is 7,5 kgs. Each 1mm of the glass thickness adds 2,5 kgs per 1 sq.m.
The material may be coloured glass, textured, fused, sandblasted, bevelled glass, or any combination of them all.
The design of the glazing is based upon the glass sample choice, the digital simulation might also be done.

Pictures at the surface of the glass. The glass having some parts covered by the protecting film is subdued to the stream of the abrasive sand. That way the flat decoration or carving of the surface (what produces extra effects) of the glass is done. Sandblasting the flashed or enamelled glass can give multicolour ornament. Matted surface of the glass can be glazed and fired to obtain additional effect.
Finishing. Sandblast decorated surface is covered with the protective layer to make it stainproof.
The material. Stained, fused, textured and bevelled glass (or their combination) can be sandblast decorated.

Relief szklany to tafla szkla z uformowaną wg dowolnego wzoru powierzchnią. Pogrzewając bezbarwne lub kolorowe szkło do temperatury w której zaczyna płynąć uzyskujemy pożądany efekt urzeźbienia. Podłoże na którym leży tafla szkła "odciska się" na szkle. Podłożem jest uprzednio uformowany z materiału ogniotrwałego kopyto - wzór.
 

Szkło stapianie (Fusing, szkło  spiekane)  to technika  polegająca  na łączeniu  bezbarwnych lub kolorowych szkieł poprzez stopienie w wysokiej temperaturze.
Poprzez podgrzewanie nałożonych na siebie kawałków szkła taflowego powstaje dekoracyjna kompozycja.  Kawałki tworzą jedną całość,  a dodatkowo na powierzchni szkła powstaje faktura, która przenosi się z uprzednio uformowanego podłoża pieca. Stapiane szkła  mogą być bezbarwne, dodatkowo barwione oraz barwione w masie.

Glass doors are functionall interior decoration.Drzwi całoszklane stanowią funkcjonalną dekorację wnętrza. Thay may open ajar or slide. Glass doors are made from hot-sculpter, tempered glass. They may have natural glass colour or be colouerd (glass enamels are fired in high temperature, what makes the colour permanent). They may be matte or transparent.

 According to the wish we make glass handless and doorknobs, fitting the design of the doors. Dimensions Glass elements may not exceed 1,5 m x 3000 m. If the space to be covered is bidder, one have to divide it. Typical glass door is ca 50 kgs heavy.
Strenghtening -The doors are tempered.
Fittings - allow fixing the doors as opened ajar or sliding. As the doors are heavy - special dedicated system fittings are necessary (alas, not inexpensive).
Doors' design - is made according to the sugested general idea. The precise measurements at the site are done. Next the precise drawings and computer visualisations are done. Before the final execution the samples are made.
The material - is the 8mm or 10mm thick glass.

Screens, partitions, skylights, plafonds, ceilings, windows, floors, table-tops made of impressive art glass. The glass is hot-treated (fused) and - if necessary - tempered. Every piece is an unique design. The glass is hot-coloured, what makes the colour permanent.
Size. The size can not exceed 1,5 x 3,0 meters. To cover bigger spread additional divisions have to be made. The weight of the element depends of it's size and thickness - 1 sq.m of the 10 mm thick glass weights 25 kgs. Reinforcement. Big panels ate strenghtened by increasing their thickness. The textured galss (relief) can be tempered.
Mounting the glass elements usually needs no additional fittings good way of fitting-up is setting the glass panel directly into the opening in cardboard-gypsum board). We offer the assistance if the fittings have to be custom made.
Design of the glass is made after preliminary ideas - next the conceptual painterly sketches 1:10 and computer visualisations are made. Sometimes, when nesessary, the glass samples are executed before the final baking .
The material fused glass is 8 - 30 (or more) mm thick, glass relief is 4 - 10 mm thick.

The tempered glass' feature is it's enhanced shock resistance (mechanical and thermal). In the case of breaking tempered glass crushes onto tiny pieces, what reduces the risk of the injury. The tempering process does not afflict the optical quality of the glass.
We produce tempered glass architectural elements such as partitions, glass doors, screens, skylights, ceilings, floors, table-tops...
The glass is custom designed. It can be colourless or coloured. The glass is hot coloured (the colour is melted into the glass) what makes the colours permanent. Colouring the glass we do not use the organic medium based enamels, drying in the room temperature.
The material. We temper flat glass art relief panels, coloured or not, and the industrial flat glass, gloss or matte.
We temper crircular arc bent glass if:

• maximum glass size is 2000 mm x 1500 mm
• only the shorter side of the panel may be bent and only to the circular arc
• minimal bending radius - 700 mm for 4-6 mm thick glass, 800 mm 8-12 mm glass, 1500 mm for 15-19 mm glass

In our Studio the glass lighting elements are only individually designed and custom made, often as the complement of the architectural glass decoration. We do not serially manufacture glass lampshades.

There is a lot to choose from, because each of the glasshouses in USA, Germany, France and Poland produces houndreds kinds of glass. We make the glass too! We cut it to the size, deliver and install it at the destined location.